Category

Theme images by Storman. Powered by Blogger.
Best viewed in Google Chrome

Labels

Labels

Advertisement

Popular Posts

Services

Showing posts with label Industry Guru. Show all posts
Showing posts with label Industry Guru. Show all posts

Refractory Bricks, Mortar and Castable for Reheating Furnace Lining

- No comments

17-Jun-2023

Reheating Furnaces serve the purpose of heating various intermediate products of Steel like- ingots, blooms or billets before rolling to give them different shapes of angles, channels, bars, slabs, rods & wires etc 

Read: What are Reheating Furnaces Area wise specifications of Refractory Bricks and Castables or Blocks which can be used for lining of reheating furnaces and the quality of Refractory Mortar which can be used for laying the bricks are given hereunder -

Reheating Furnace Hearth

  1. Dense high alumina bricks with low iron content. Alumina (Al2O3) 88-90%, Iron (Fe2O3) 1.8% (max), Bulk Density (BD) 3-3.2 gm/cc, Apparent Porosity (AP) 16-18%, CCS(kg/cm2) 800 (min), RUL(taOC) around 1550-1600, PLC at 1600OC/2hrs (+/-) 0.2% (max).

  1. Basic Magnesia, Mag-chrome bricks. MgO around 55-60%, Chrome (Cr2O3) around 12-15%, Silica (SiO2) 8% (max), AP 18-20%, CCS (kg/cm2) around 450-500, RUL (taOC) 1600 (min), PLC at 1600OC/2hrs (+/-) 0.5% (max).

Furnace Roof

Alumina (Al2O3) around 70%, Iron (Fe2O3) around 2.5-2.8%, BD 2.6-2.7 gm/cc, AP 21-23%, CCS (kg/cm2) 500 (min), RUL (taOC) around 1450-1500, PLC at 1500OC/2hrs (+/-) 2.5% (max).


Furnace Side-Wall and for General purpose

  1. Low porosity dense bricks. Alumina (Al2O3) 45%, Iron (Fe2O3) 1.6-1.8%, BD around 2.2 gm/cc, AP around 16%, CCS (kg/cm2) around 500, RUL (taOC) 1500 (min).
  2. Alumina (Al2O3) 40%, Iron (Fe2O3) 2.0-2.2%, BD 2.1 gm/cc (min), AP 22% (max), CCS (kg/cm2) around 350, RUL (taOC) 1400 (min).

Furnace Bottom, Blocks (Burner Block, Well Block, Seating Block, Seating Well Block) and Castables

  1. Medium purity Low Cement Castable (LCC). Alumina (Al2O3) around 90%, Iron (Fe2O3) 1.0-1.5%, BD 2.7-2.9 gm/cc, PCE 37 Orton (min), CCS (kg/cm2) at 110OC/24hrs 600 (min), at 1500OC/3hrs 550 (min), PLC at 1500OC/2hrs (+/-) 1.0% (max).
  2. Medium purity Castable conventional type. Alumina (Al2O3) around 60%, Iron (Fe2O3) 1.8% (max), BD 2.1 gm/cc (min), PCE 36 Orton (min), CCS (kg/cm2) at 110OC/24hrs 350 (min), at 1500OC/3hrs 450 (min), PLC at 1500OC/3hrs (+/-) 1.5% (max).

Furnace Door, Flue Stack, Heaters

Insulating Castables. Iron 1% (max), BD 1.0-1.2 gm/cc, CCS (kg/cm2) at 110OC/24hrs around 12-15.


Mortars

Have to be compatible with the laying brick quality (chemical spec).

All the data given above are tentative and should not be considered as ‘Typical Specification Data’. 

Methods of installation (Read: Refractory Installation Procedure and Heating Schedule to be followed after starting a Furnace) may be provided by the refractory supplier.

What are the Reheating Furnaces ? | Refractory Industry | Iron and Steel | Industry Guru

- No comments

09-Oct-2022

Reheating Furnaces are used for heating the intermediate products of steel like- ingots, blooms or billets at temperatures around 1000 - 12000C before rolling to give them different shapes of angles, channels, bars, slabs, rods & wires etc. The furnace is a chamber having inside refractory lining to conserve heat and generally includes a mechanism for transporting products continuously from one end to the other end. Heat for the furnace is provided by natural gas or fuel oil.

Reheat Furnace which is considered an accessory to the rolling mill is a critical factor in the quality of end-product. There are various types of reheating furnaces which can be differentiated on the bases of - (1) the method of heating, (2) method of charging the reheating furnace, (3) the movement of steel stock in the reheating furnace, and (4) the heat recovery methods.

Based on the method of heating, a reheating furnace can be Combustion Heating type or Electrical Heating type. The combustion heating type furnace can use solid, liquid, or gaseous fuel. Based on the method of charging, the reheating furnace can be classified as Batch type or Continuous type. In batch type reheating furnaces the charged material remains in a fixed position on the hearth until heated to rolling / forging temperature while in continuous type reheating furnaces the charged material moves in the reheating furnace and is heated to rolling temperature as it progresses in the furnace. Based on the movement of steel stock inside the furnace, continuous type reheating furnaces can be further classified as Pusher Furnace, Rotary Hearth Furnace, Walking Beam Furnace, Walking Hearth Furnace, and Roller Hearth Furnace.

Based on heat recovery method a reheating furnace can be either Regenerative type or Recuperative type. Regenerating type reheating furnace uses regenerative burners while Recuperative type reheating furnace uses recuperators for heat recovery from the exhaust gases.

(If you want to know in details about any of the above mentioned types of reheating furnaces then please let us know in the comment section below as we will bring separate post for the same).

In view of saving energy, requirement of Refractories with low thermal conductivity are required particularly for Door, Heaters, Flue-stack and further, for Hearths these criteria are corrosion, abrasion & spalling resistances with good strength. For these purposes, dense low-iron, high-alumina or chrome-magnesia bricks are best suited for Hearth. The side-wall and roof are lined with high-grog alumino-silicate bricks. Precast / Prefired (PCPF) blocks can be used for Burner-block, Seating Well Block, Well Block as well as for Furnace Bottom, made of low-iron high-alumina dense refractories having excellent spalling & abrasion resistances. The advantage of using PCPF blocks is that they can save time for both installation & for drying/preheating inducing more availability of the furnace. In the event of choosing Precast / Pre-fired (PCPF) blocks one has to take care of the design of these blocks which should be such that one person can handle them.

For more details refer to our post: Area wise Refractory specifications and lining procedure for reheating Furnaces

 

Slag Cement Association (SCA) announces Slag Cement Project 2020 Awards | Cement Industry News

- No comments

 30-April-2021

First let us refresh our knowledge a little bit about Slag Cement and how it differs from Portland Cement.

Slag cement can be used in concrete, either as a separate cementitious component or as part of a portland cement concrete. Slag Cement works synergistically with portland cement to increase strength, reduce permeability, improve resistance to chemical attack and inhibit rebar corrosion. When used as part of a portland cement concrete, slag reacts with both the water (latent hydraulic reaction) and the hydrated cement paste (pozzolanic reaction), resulting in a more refined microstructure than that of a plain portland cement.  

However, there are some disadvantages of Blast Furnace Slag Cement Its initial strength is low, because of which it cannot be used in RCC works. As the initial setting time of Blast Furnace Slag Cement is high, this cement is not used for emergency or repair works as well.

The Slag Cement Association (SCA) is a nonprofit trade association representing producers and shippers of slag cement in the United States. Since 2010, been running its annual slag cement project of the year awards program. The slag cement awards recognize projects for excellence and innovation in concrete using slag cement.


SCA has recently announced the recipients of its 2020 Slag Cement Project of the Year Awards. Sixteen construction projects from across the United States were chosen to showcase the broad applications of slag cement and its impact on creating more durable and sustainable concrete.

In the architectural category, Lehigh Hanson used slag cement in the construction of a new four-story parking garage at the Chesapeake Beach Resort & Spa to allow an additional 700 vehicles to park on the resort’s premises. The other winning project in this category, slag cement was used for durability enhancement and potential sulfate and alkali silica reaction (ASR) mitigation by St. Marys Cement in the construction of Adventure Cove at the Columbus Zoo and Aquarium in Ohio.

Lehigh Hanson also won in the sustainability category for using slag cement in the construction of the 72-story One Manhattan Square residential building at the foot of the Manhattan Bridge in New York City.

The awards for innovative application has been given to LafargeHolicm for the replacement of a 323 m (1060-ft) superstructure above the historic Lake Tillery Bridge in the Piedmont area of North Carolina. Slag cement was used in the deck placements of the bridge to increase durability and to mitigate against alkali silica reaction (ASR) in the concrete. In addition, slag cement helped with holding the slump longer and increased the workability of the mixture to help the finishers battle the strong heat during the placements. Argos was also awarded for its work on the Nucor Steel of Florida project where slag cement helped exceed the specified compressive strength of 4000 pounds per square inch (psi) in 28 days in a 50 percent replacement mixture with 245 kg (540 lbs) of cementitious material and with a 0.49 maximum water-cementitious materials ratio (w/cm). Lasty, St. Mary’s Cement was recognized for the Pittsfield Charter Township Planning Commission Development, a large residential project which included apartments, rowhouses, mixed-use commercial buildings, and stormwater retention buildings. Up to 35 percent slag cement was used in the concrete mixture design for its workability, increased control of curing and hydration cycles, and long-term durability benefits.

The remaining SCA winners include:

Durability

High Performance

Green Design

Besides, there are two 2020 Slag Cement Research Award Winners:

  • Sustainability of Concrete in the Pacific Northwest—Hilary Chaimov, Oregon State University; and
  • Innovative Application of Slag in Improving Sustainability, Flexibility, and Cost in Thin Panels—Arash Rahmatian, University of Houston-Downtown

 (Source: Slag Cement Association News; edited)


FLSmidth wins contract for full digitalization of three cement lines at Kirene in Senegal, West Africa

- No comments

 19-April-2021

The Danish engineering company FLSmidth has received contract from Chinese construction giant CBMI Construction Co., Ltd., part of the Sinoma Group, to supply and install three complete control systems for two existing and one new cement line at Kirene in Senegal.

In cement industry sector FLSmidth has a strong presence in India, Brazil and Russia whereas FLSmidth's minerals segment is being contributed heavily by the growing urbanization and industrialization in the developing countries, particularly China and India.

Energy savings, higher fuel substitution rates and maintenance planning – digitalisation presents massive opportunities for the cement industry at a time when energy costs, over-capacity and new environmental regulations are major concerns to many plant owners. With a complete and integrated control system across all three lines at Kirene, CBMI Construction creates the digital foundation for its customer to make data-driven decisions on process optimization, stay on top of maintenance jobs and accelerate energy savings.


All three lines will have a shared digital infrastructure build on the FLSmidth ECS/ControlCenter™ platform.  On top of that comes the FLSmidth plant data management software, ECS/PlantDataManagement. The data management software is the operational interface to all data, allowing plant management to transform performance data into real-time KPIs and giving operators access to critical process information via tailored dashboards. 

According to CBMI Construction, the ECS software from FLSmidth is essential in operationalising the 12,000 data points at the new Kirene line (3) for the customer. “With a combination of extensive process knowledge and digital solutions that integrate across different equipment suppliers, FLSmidth is instrumental in securing the efficiency benefits our customer expects,” explains CBMI.

“With more than 1,500 active product and process control installations in the cement industry, this order reaffirms our strong digital expertise,” says Jens Adler, General Manager in Group Digital at FLSmidth. “The cement industry might be a little slow in adopting Industry 4.0 technologies, but digitalisation is transforming how many respond to increasing demands for emission reductions and efficiency. This is reflected in the emphasis on digital solutions as part of our MissionZero ambition to offer cement producers zero emission cement production by 2030,” Mr. Adler concludes.

Apart from the digital infrastructure, the new line (3) at Kirene will be equipped with ECS/CemScanner® and QCX/BlendExpert™ from FLSmidth to further optimize the performance of the plant. The order became effective in Q1 2021.

FLSmidth, headquartered in Copenhagen (Denmark), supplies the minerals and cement industries globally with everything from engineering, single machines and complete processing plants to maintenance, support services and operation of processing facilities. FLSmidth employs more than 12,000 people worldwide in offices in more than 50 countries worldwide. As reported by the company about 99 per cent revenue of FLSmidth comes from outside Denmark.

Contact Investor Relations

Nicolai Mauritzen, +4536181851, nicm@flsmidth.com

Contact Media Relations:

Rasmus Windfeld, +45 40 44 60 60, rwin@flsmidth.com

 (Source: FLSmidth via Globenewswire; edited)


Use of Sillimanite as Raw Material in Refractories

- No comments

Sillimanite as a natural and untreated mineral is a very important raw material for high alumina refractories which are extensively used in Iron and steel, Petrochemical, Electrical, Cement, Zinc and Glass industries.

https://www.industry.guru - Sillimanite Rocks image
Sillimanite when heated above 1545­OC converts to Mullite and the excess silica as glass, crystoballite or tridyamite. The formation of the glassy phase can be reduced by addition of a small percentage of technical or calcined pure alumina fines (like - HGRM 30 etc) which reacts with this excess silica to form mullite, which in turn help in enhancing the quality of the product.

Due to the very low expansion or contraction on heating, sillimanite need not be calcined before use. Unlike sillimanite from most of the sources in the World which are used as it is, the Rewa sillimanite (found in Madhya Pradesh, India), because of its impurities, should not be used as such. It is always better once to wash these lumps in the raw material yard itself and then after shifting to the Mill House and crushing, grinding pass through magnetic separator to eliminate the free iron impurities.

The ideal firing temperature of green refractory bricks made of sillimanite grains as a major raw material is 1450 - 1500OC, to be fired either in a batch type or a tunnel kiln. The soaking time will vary depending upon the volume, shape, setting and other constituents of the bricks (particularly raw clay used and sintering aid, if any).


Sillimanite Refractories

Sillimanite refractories are characterized of high refractoriness, very low coefficient of thermal expansion, high refractoriness under load (RUL) and mechanical strength with great resistance to thermal shock (spalling resistance), abrasion and slag corrosion. Due to their exceptionally high resistance to spalling and corrosive actions of molten glass, chemical attacks of soda, borax and other frits, they are most suitable for Glass Melting Furnace (GMT), Oil fired Furnace, Cement Rotary Kiln, Blast Furnace, Electric Arc Furnace (EAF) roofs, Hot Metal Mixer, Combustion Chambers and Metallurgical operations done in Zinc Furnace, Gold Refining Furnace etc.

https://www.industry.guru - Sillimanite Bricks image

Particularly in Glass industry sillimanite refractories have got many applications, such as in glass melting tank furnaces (to be discussed in detail in a separate article) in all parts open to the products of combustion like combustion chambers, flues, door pillars which may have to support heavy load at high temperatures, recuperators and such other parts which are liable to be subjected to fluctuations of temperature. Assam Sillimanite once available in good quality and quantity, even for export, were used to be cut into blocks of various sizes from solid rock at the site of deposits itself which were then sent to the user’s site for their direct use in construction of Glass Melting tank Furnace bottom. But now it is a forgotten past! However, there are quite a few suppliers in India who manufacture these GT blocks, mostly using certain percentage of sillimanite sand or even sillimanite lumps after crushing and grinding. To name a few are Maithan Ceramics Limited (MCL), Tata Refractories Limited (TRL), OCL India Limited, ORIND (quality ?) etc. So far the properties like density (BD), porosity, mechanical strength, slag corrosion resistance and consistency of performance etc. are concerned, high capacity machine pressed bricks are far too superior to those made by pneumatic ramming. Although it is a general practice to give some ‘patching/finishing’ manually before inspection - dispatch to particularly big and complicated shape refractory bricks but from the customers’ point of view it is most important that during inspection it must be ensured that except for the ‘look’ only, the refractory brick (or block) does not depend much on the ‘finishing’, if at all, done on it. Patching is a wrong practice as it is done to camouflage the flaws which could be detected by seeing the brick.

For GT blocks the machine finish of the surface is very important. It must be evenly polished or ground to ensure that the warpage is negligible. One of the main criteria for acceptance of these blocks should be that in the assembly there should not be any open joint (the specification could be from 0.2mm - 0.3mm filler gauge up to a maximum 20 - 25mm depth from the top). This is a must to avoid the penetration and subsequent crystallization of glass and alkali vapours in these joints. To meet this criterion the manufacturer should have facilities for grinding of these blocks minimum in 4 faces and in some bricks up to 6 faces and then marked accordingly.