Category

Theme images by Storman. Powered by Blogger.
Best viewed in Google Chrome

Labels

Labels

Advertisement

Popular Posts

Services

Showing posts with label Suri clay. Show all posts
Showing posts with label Suri clay. Show all posts

Indian China Clays: Occurrences, Uses and Properties

- No comments

6-March-2010
Both China clay and Ball clay belong to the kaolin group. Although the primary constituent is Kaolinite in both of them, the latter has greater plasticity and lesser refractoriness owing to the presence of Montmorillonite in considerable amounts. So, ball clay is normally added to china clay to achieve greater strength, increase refractoriness and the required plasticity. To discuss all aspects of ‘China Clay’ in one post would be quite a long one and a reader who is searching a specific topic about china clay, may not like to go through the whole article. So, we have divided the different topics of china clay like - its beneficiation, improvement in its quality (benefit) after different treatments of beneficiation, characteristics (properties) of china clay required for different industries etc. into separate posts. Here we will discuss the following:
=> Properties and occurrences of china clays particularly in India.
=> Uses of china clay in general.
=> A few addresses of Mines (also Suppliers) of Indian china clays along with their sample Test Reports given at the end.   

Properties and Occurrences of China Clay in India
As for genesis, both China clay and ball clay are the products of weathering processes of feldspathic rocks. What happens during weathering that the silica and iron oxides are partially leached with the residue (essentially an aluminium silicate in composition) forming the in-situ deposits. Depending upon the efficiency of the weathering process, the impurities like grit i.e. siliceous particles and iron oxide minerals exist in different percentages in different clay deposits.
India has extensive deposits of china clays distributed in almost all states. However, good deposits are found Chaibasa, Singhbhum (near Ranchi, Jharkhand), Mokdum Nagar, Kharidumri, Suri, Qasim Bazaar all in Bankura, Birbhum districts (West Bengal), Barmer, Pali, Bikaner, Ajmer, Nim-ka-Thana, Udaipur (Rajasthan), Anantpur, Nellore and Guntur (AP), Chanda, Ratnagiri (Maharashtra), Udhampur (J & K). Very good quality china clays are found in Kerala in Kundra (Quilon), Ernakulam and Trivandrum districts. The estimated total reserve of crude clay is around 7.5 lakh tones. The spray dried kaolin is marketed under the trade name “Kundara Kaolex”. The average chemical analyses of some Indian china clays are presented in the following table.         
   Table: Chemical Compositions (in %) of some Indian China Clays 
SOURCE
SiO2
Al2O3
Fe2O3
TiO2
CaO
MgO
K2O
Na2O
LOI
Gujarat
Kutch Minerals
Ashapura
AMI China Clay
Eklera

47.75
49.63
52.45
48.92

34.25
34.00
29.83
33.60

0.90
0.60
0.94
1.30

1.30
1.37
1.48
1.12

1.23
0.54
1.14
0.65

0.24
0.58
0.59
0.28

0.35
0.22
0.35
1.00

0.45
0.61
0.86
0.31

12.45
12.20
11.90
12.80
Bihar - Jharkh
Rajmahal (pink)
Rajmahal (white)
Chaibasa - I
Chaibasa (S.Fine)
Simultala

46.68
48.90
47.90
46.59
47.30

35.29
34.51
36.00
35.95
38.20

1.90
1.71
1.25
1.12
0.47

0.90
0.50
Tr.
Tr.
0.07

0.28
0.67
1.24
1.40
0.35

0.50
0.20
0.40
0.40
0.10

0.28
0.41
0.61
0.33
1.55

0.60
0.52
0.75
0.90
0.15

13.12
12.60
12.25
13.22
11.80
West Bengal
Mokdum Nagar
Mohammad Bazaar

44.10
44.30

37.39
36.69

2.60
2.10

1.37
0.80

0.10
0.30

Tr.
0.26

0.20
0.60

0.75
0.29

13.48
14.35
Rajasthan
Modi Clay (P-90)
Modi Clay (TT-75)

44.46
46.82

37.03
36.70

0.80
1.00

Tr.
0.20

2.00
0.70

0.41
0.25

0.07
0.15

1.02
0.20

14.65
13.87
Kerala
Marthandamkonam
Kundara, Quilon
English India
Chilambil, Trvndrm
Sasthavattom

46.47
45.83
46.30
45.60
44.11

38.13
38.17
38.80
37.40
38.17

0.28
1.43
0.50
0.75
1.30

0.79
0.40
0.10
0.90
1.55

Tr.
0.90
0.02
Tr.
Tr.

0.59
0.12
0.07
0.41
0.04

0.02
0.25
0.07
0.02
0.02

0.08
0.72
0.08
0.02
0.43

14.20
14.00
14.10
14.85
14.26
Tamil Nadu
Neyveli Clay

45.00

36.72

0.38

1.75

0.55

Tr.

0.03

0.24

14.24

Uses of China Clay
China clay is used in rubber, ceramic, textile, paint, pharmaceutical, paper, cosmetic industries and also as in refractory industry for the production of insulation bricks, insulation mortars and castables [Refer to our separate post Use of China Clay as Raw Material in the Production of Refractory Insulation Bricks].
In ceramics china clay is widely used in manufacturing earthenware, fine china, stoneware, tiles, pipes etc. Usage of china clay for ceramic industry depends on factors like - plasticity, shrinkage after drying and on firing, colour on firing, refractoriness etc. The grit content should be around 1%.
The fine grained kaolinites (China clays) mixed with montmorillonites find applications in foundry moulding sands. Purer forms of china clays have extensive uses in paper, textile, rubber and cosmetic industries. [Refer to our separate post Characteristics of China Clay Required for Ceramic and Other Industries].
As a decolouriser of oils it is known as ‘Fuller’s Earth’. Mixtures of china clays and montmorillonites are also used as cracking catalysts for heavy petroleum fractions. Other areas of limited use are leather, paint, plastics, soaps, polishing compounds, emulsifying agents etc.        
Mines and Suppliers
Below are addresses of some of the above mentioned mines (also suppliers) of china clays of different grades form Bihar, Jharkhand and West Bengal whom I visited during 2005 - 2006 accompanied by the test results of the china clay samples that were drawn and collected by myself during my visits to these mines.
Chaibasa (Singhbhum) China Clay
Address:
Singhbhum Mineral Co., Post Box No. - 24, Station Road, PO- Chaibasa
PIN - 833 201 (Jharkhand).
Contact person: Hemant Rathore (Mine owner)
Tel: 91-6582-256551/258336
Mob: 91-9431110051.
Mine address:
Singhbhum Minerals, Hatgamharia, Chaibasa (Jharkhand).
Sample Test Report (average report):
1. Sample = China clay (RT grade), drawn from Pit No.9.
Total Shrinkage (after drying & firing 1330OC/2 hrs) = 15%
Characteristics = White, clean, no spot.
LOI % - 11.6 
Al2O3% (min) - 36.0
Fe2O3% (max) - 1.7
TiO2% (max) - 0.15
2. Sample = China clay (pink variety)
Total Shrinkage (after drying & firing 1330OC/2 hrs) = 17%
Characteristics = Pinkish White, clean, no spot.
LOI % - 11.5 
Al2O3% (min) - 33.52
Fe2O3% (max) - 3.04
TiO2% (max) - 0.15
3. Sample = China clay (RT grade, upper layer) drawn from Pit No.9.
Total Shrinkage (after drying & firing 1330OC/2 hrs) = 15%
Characteristics = White, clean, no spot.
LOI % - 11.6 
Al2O3% (min) - 36.28
Fe2O3% (max) - 1.9
TiO2% (max) - 0.12

Mine address:
D.M.Minerals, Gondkida Mines, Hat Gamharia, Chaibasa (Jharkhand).
Sample Test Report (average report):
1. Sample = China clay (Special/Rubber grade)
Total Shrinkage (after drying & firing 1330OC/2 hrs) = 16%
Characteristics = Milky white, clean, without any spot.
LOI % - 14 
Al2O3% (min) - 36.0
Fe2O3% (max) - 1.92
TiO2% (max) - 0.25
2. Sample = China clay (crude, unwashed)
Total Shrinkage (after drying & firing 1330OC/2 hrs) = 12%
Characteristics = Pinkish White, clean, no spot.
LOI % - 13.8 
Al2O3% (min) - 36.00
Fe2O3% (max) - 1.96
TiO2% (max) - 0.02
3. Sample = China clay (SF grade)
Total Shrinkage (after drying & firing 1330OC/2 hrs) = 16%
Characteristics = Milky white, clean, no spot.
LOI % - 14.4 
Al2O3% (min) - 36.44
Fe2O3% (max) - 1.39
TiO2% (max) - 0.40

Address:
Gupta Minerals, PO- Hat Gamharia, Dist.- West Singhbhum
PIN - 833 214 (Jharkhand).
Contact person: Ajay Kr. Gupta (Mine Owner & Supplier)
Tel: 91-6589-285267
Mob: 91-983213463, 91-9835142033
Sample Test Report (average report):
Sample = China clay (SF grade)
Total Shrinkage (after drying & firing 1330OC/2 hrs) = 17%
Characteristics = Buff, Off-white.
LOI % - 10.0 
Al2O3% (min) - 33.0
Fe2O3% (max) - 2.8 - 3.0
TiO2% (max) - 1.0
(CaO + MgO) - 0.5
Na2O - 0.88
K2O - 1.38
PCE - 30 (Orton)
Address:
Chotanagpur Commercial Corpn. (P) Ltd.
Post Box - 54, Chaibasa Dist.- West Singhbhum
PIN - 833 201 (Jharkhand).
Contact person: R.P. Rungta (Supplier)
Tel: 91-6582-256062, 91-33-22101235/1236
Mob: 91-9431110291
Sample Test Report (average report):
Sample = China clay
Total Shrinkage (after drying & firing 1330OC/2 hrs) = 14 - 15%
Characteristics = Yellowish white, clean.
LOI % - 12.0 
Al2O3% (min) - 31.38
Fe2O3% (max) - 3.36
TiO2% (max) - 0.30
PCE - 29 - 30 (Orton)
Lohardaga China Clay (Near Ranchi, Jharkhand)
Address:
Regal Sales and Marketing, Lohardaga, Ranchi
Sample Test Report (average report):
Sample = China clay (INDAL Type)
Total Shrinkage (after drying & firing 1300OC/2 hrs) = 7%
Characteristics = Milky white, clean.
LOI % - 14.0 
Al2O3% (min) - 37.00
Fe2O3% (max) - 1.35
TiO2% (max) - 3.0
PCE - 32+ (Orton)
Bhilwara (Rajasthan) China Clay
Address:
Bhilwara China Clay Suppliers
Main Bazaar, Bhilwara (Rajasthan)
Sample Test Report (average report):
Sample = China clay
Total Shrinkage (after drying & firing 1400OC/2 hrs) = 16%
Characteristics = Greenish white, clean, minor crizzling.
AP = 5.5
BD = 2.5 gm/cc
LOI % - 13.5 
Al2O3% (min) - 37.0
Fe2O3% (max) - 1.4
TiO2% (max) - 4.0
PCE - 32 (Orton)
Suri, Birbhum China Clay (West Bengal)
Address:
A.K. Industries Pvt. Ltd.,
P-7, Dr. Suresh Banerjee Road, Kolkata - 85.
Tel: 91-33-23505765/25348349/25533737
Mob: 91-9831219022
Contact person: Soumendu Nag
Mob: 91-9434007964.
Mine address:
A.K. Industries Pvt. Ltd. Village - Kalipur
P.O.-Barabagan, Suri
Dist. - Birbhum (WB).
Tel: 91-3462-225423
Sample Test Report (average report):
1. Sample = China clay
Total Shrinkage (after drying & firing 1400OC/2 hrs) = 18%
Characteristics = White, clean.
AP = 10%
BD = 2.42
LOI % - 14 
Al2O3% (min) - 37.0
Fe2O3% (max) - 2.3
TiO2% (max) - 2.5
PCE = 33 (Orton)
Address:
Patelnagar Minerals & Industries Pvt. Ltd. (PMI),
20B, Abdul Hamid Street (1st Floor), Kolkata - 700069.
Tel: 91-33-22486915/22486928/23371276
Fax: 91-33-22489546
Contact person: A.Ahmed (Chief Executive)
Tel: 91-3462-260245/260213
Mines and Refinery address:
PMI Private Ltd., Patelnagar, Suri
Dist. - Birbhum (WB)
Tel: 91-3462-260225/260223
Sample Test Report (average report):
Sample = China clay (Refractory grade)
[All grades of china clay are available with them suitable for rubber, textile, cosmetic, paint and paper industries.]
Total Shrinkage (after drying & firing 1330OC/2 hrs) = 18%
Characteristics = Off-white, clean.
AP = 7%
BD = 2.5
LOI % - 14 
Al2O3% (min) - 37.0
Fe2O3% (max) - 2.0
TiO2% (max) - 3.0
PCE = 32½ (Orton)

Related Posts